Instruction Manual
D103557X012
Parts
April 2016
71
Section 7 Parts77
Parts Ordering
Whenever corresponding with your Emerson Process Management sales office about this equipment, always mention
the controller serial number.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Process Management should
not, under any circumstances, be used in any Fisher instrument. Use of components not supplied by Emerson Process
Management may void your warranty, might adversely affect the performance of the instrument, and could cause personal
injury and property damage.
Parts Kits
Note
All DVC6200 SIS parts kits with elastomers include extreme temperature
fluorosilicone elastomers.
Kit Description Part Number
1* Elastomer Spare Parts Kit (kit contains parts to
service one digital valve controller) 19B5402X022
2* Small Hardware Spare Parts Kit (kit contains parts
to service one digital valve controller) 19B5403X012
3* Seal Screen Kit
[kit contains 25 seal screens (key 231)
and 25 O‐rings (key 39)] 14B5072X182
4* Integral Mount Seal Kit (for 667 size 30i - 76i
and GX actuators)
[kit contains 5 seals) 19B5402X032
5* Terminal Box Kit (see figure 7‐1)
Note
Use only with replace in-kind. The following terminal boxes are
compatible only with PWB Assembly electronics hardware revision 2
(HW2).
Aluminum
with I/O Package 19B5401X552
with I/O Package, M20 19B5401X582
Stainless Steel
with I/O Package 19B5401X562
with I/O Package, M20 19B5401X592
6* I/P Converter Kit 38B6041X132
Figure 7‐1. Terminal Box
X0430
Key Description
50* PWB Assembly (HW2) (see figure 7‐2 and 7‐4)
for DVC6200 SIS and DVC6205 SIS
Note
The following PWB Assemby is compatible only with the terminal box
shown in figure 7‐1. Contact your Emerson Process Management
sales office if a replacement PWB is needed.
Hardware Revision 2 (HW2), with I/O Package
For instrument level SIS
*Recommended spare parts
To Next Page
Loading...
