EasyManuals Logo

Fisher Impulse User Manual

Fisher Impulse
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
11
3. Walk slowly and sweep the search coil in a tight
semicircle, keeping the coil parallel and as close to
the ground as practical.
4. The IMPULSE has three signals that alert you to a
target: 1 ) an audible tone, 2) a meter that
measures signal strength and 3) a flashing red light.
Listen intently for the IMPULSE audio signal tone. The
tone increases in volume and raises in pitch when
directly over the target and decreases in volume
and lowers in pitch when moving away.
5. Overlap your sweeps by at least 50 percent.
Remember that your coil’s depth penetration is
conical, and if you don’t overlap each sweep you’ll
miss the deeper targets.
6. Search in a methodical manner. Pay close
attention to where you’re going and where you’ve
Be sure to keep the search
coil parallel and close to
the ground at all times.
When the stem length is properly adjusted
the IMPULSE is balanced for sweeping in a
tight semicircle. Wide to the right for right
handers. Wide to the left for left handers.
Be sure to overlap your sweeps.
SEARCHING

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fisher Impulse and is the answer not in the manual?

Fisher Impulse Specifications

General IconGeneral
BrandFisher
ModelImpulse
CategoryMetal Detector
LanguageEnglish

Related product manuals