Fishman LDS9000 - Dispensing Only: Serial Configuration; Serial Transfer of Step Count for Dispensing

International +00 1 508-435-2115 www.shmancorp.com 28
International +00 1 508-435-2115 www.shmancorp.com
27
9.4 Dispense Only – Serial Conguration
9.4.1 The “Dispense Only” unit can be set to either
the Traditional LDS9000
TM
or Process Control2
®
screen with the designated dispense program.
The step count in the illustration on the right
should be at 0. Tap/click the Enter Steps button.
A pop-up message will appear with transferred
step count. Tap/click OK and the data will be
transferred.