29 Fishman Corporation USA Toll Free 1-800-433-2115
9.5 Prime Only – Operator Entry
9.5.1 After SmartDispenser
®
units have been setup
as either “Priming Only” or “Dispensing Only”,
select “Operator Entry” as a means
of transferring step count.
9.5.2 Perform priming steps with dispense gun and
syringe barrel in the same manner described
in steps 9.2 through 9.2.3. When completed
record step count manually (pen and paper,
for example).
9.5.3 If you are providing primed guns for multiple
“Dispensing Only” stations connect the next
dispensing gun. With the settings at RETRACT
(Extract) and MANUAL (Auto), activate foot pedal
or nger switch. This will return the step count
to 0 without affecting the gun.
28
Fishman Corporation USA Toll Free 1-800-433-2115
To Next Page
Loading...