International +00 1 508-435-2115 www.shmancorp.com 30
NOTE: If you are priming guns for multiple “Dispensing Only” units
it is essential that the guns be labeled or marked in such a
way that they only be used with the designated “Dispensing
Only” unit. The saved step count information for each gun
can vary slightly. Optimal performance can only be achieved
by matching the precise step count for the dispense gun and
syringe barrel to the specic SmartDispenser
®
.
9.6
Dispense Only – Operator Entry
9.6.1 Connect primed dispense gun to SmartDispenser
®
unit. Tap/Click Enter Steps button. Using the
pop-up calculator enter the step count.
International +00 1 508-435-2115 www.shmancorp.com
29