EasyManuals Logo

Fishman Loudbox Performer User Manual

Fishman Loudbox Performer
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
Front Panel (cont.)
15. Aux Level
Use this to control the level of an audio device plugged into the Aux input. Note
that the Aux channel is independent of the Mute switch, so you can play pre-
recorded music on your breaks.
16. Master Volume
Set the overall level of the Loudbox Performer with the Master Volume. In gen-
eral put the Master Volume as high as possible (2 o’clock to 5 o’clock) to achieve
the cleanest sound.
17. Power
Lights up when the amplifier power is on.
18. Headphone Jack
When you plug in stereo headphones here, the speakers shut off. This output
monitors Channels 1 & 2 and the Aux input, so you can play along with
pre-recorded music through the headphones.
19. Channel Mute
The Channel Mute switch shuts off the signals from Channels 1 and 2 to the
speakers and all XLR outputs. The Channel Mute does not affect the Aux Inputs
or the effects sends. When mute is active, its button LED will be lit.
20. Tweeter Level
Turn this control to attenuate the tweeter’s output level to where it sounds best
to you.
21. Phantom Power
Provides 24V to the XLR input on each input channel to power a condenser
microphone. When phantom power is active, its button LED will be lit.
Most condenser and dynamic microphones, as well as some
preamps, can be used safely with phantom power.
However, phantom power can damage some audio devices including some
unbalanced mics, preamps or stompboxes that have been modified for
balanced XLR use. Whenever there is doubt, contact the manufacturer to
confirm compatibility.

Other manuals for Fishman Loudbox Performer

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fishman Loudbox Performer and is the answer not in the manual?

Fishman Loudbox Performer Specifications

General IconGeneral
Enclosure MaterialWood
Power Output180 watts
Speaker Size8" woofer and 1" tweeter
Channels2
EffectsReverb, Chorus, Flanger, Delay, Echo, Slap Echo
Inputs2 x XLR-1/4" combo, 1 x 1/8" (aux)
Outputs1 x 1/4" Line Out, 1 x XLR Direct Out
Phantom PowerYes
Footswitch I/O1 x 1/4" (for optional footswitch)
EQ3-band EQ

Related product manuals