Fission E-E030 - To set the Smart Recording; Smart Recording Configuration; Mac Input;Output Volume Adjustment

To Next Page

To Previous Page

After Sales Support TEL: 1300 886 649

42Page

Select the recording device: Core Audio (USB Audio CODEC)

• Click the “Audio I/O” at the Audacity Preferences interface.

• Click the “Device” and select “Core Audio (USB Audio CODEC)”.

• Click the “Channels” and select 2 (stereo).

• Click the “OK”.

NOTE: If you couldn’t find the “Core Audio (USB Audio CODEC)” from the Device list, close the

Audacity Software and re-open then try again or insure the turntable is connected to the

computer.

Under the Quality tab, set the Default Sample Format to 16 bit. Select OK to save your setting and

close the preferences window.