15
USER MANUAL
HANDY TIPS
The following tips will help you get the most out of your EXO and avoid potential issues:
• Always secure your machine. Dropping the machine can cause damage to the magnets, bearings
and brushes of the motor.
• Use only cartridges with membranes to avoid contamination.
• Rinse your needle frequently to avoid pigment drying up and slowing down your cartridges. When
rinsing your needle, ensure to dip only the tip of the cartridge to avoid back flow of fluids.
• Inspect your needles prior to use.
• Avoid scratching any part of the surface.
• Use only FDA-approved cold sterilization solutions for disinfection.
• Do not lubricate machine unless instructed otherwise.
• Store your machine in a secure place.
• Before rst use, charge battery for a minimum of 3 hours.
ADDITIONAL INFORMATION
TROUBLESHOOTING
1. Machine manufacturer
FK Irons: 1771 NW 79th Avenue, Doral, Florida 33126
2. Servicing your machine
Just like any mechanical device subject to wear, FK Irons strongly suggests that you service
your product at least once a year for a proper diagnosis of all working parts. This ensures the
optimal condition of all working parts including internal machine clean up and fresh lubrication.
Routine servicing will ensure that your machine remains functioning like the very rst day.
Service is subject to fees.
3. Warning
Disconnect machine from any power source before making any adjustments.
For service inquiries, please contact service@fkirons.com.
For additional tips and tutorials, please visit Youtube.com/fkirons
To Previous Page
Loading...