18
ELECTROMAGNETIC COMPATABILITY
This device was designed to satisfy the currently required requisites for electromagnetic compatibility
(EN 60601-1-2). Electro-medical devices require particular care during installation and use relative to EMC
requirements. Users are therefore requested to install and/or use these devices following the manufacturer's
specications. There is a risk of potential electromagnetic interference with other devices. RF mobile or
portable radio and telecommunications devices (mobile telephones or wireless connections) can interfere
with the functioning of electro-medical devices. For further information visit our website www.aemnuova.
it. The Device may be subject to electromagnetic interference if other devices are used for specic diagnosis
or treatments. Flaem reserves the right to make technical and functional modications to the product with
no prior warning.
DEVICE DISPOSAL
In compliance with the Directive 2012/19/EC, the symbol printed on the device shows that the device
to be disposed of is considered waste and must therefore be an item of ''dierentiated collection''.
Consequently, the user must take it (or have it taken) to the designated collection sites provided by the
local authorities, or turn it in to the dealer when purchasing an equivalent new device. Dierentiated
waste collection and the subsequent treatment, recycling and disposal procedures promote the production
of devices made with recycled materials and limit the negative eects on the environment and on health
caused by potential improper waste management. If the user disposes of the product in an unauthorised
fashion, administrative penalties will be applied according to the transposition laws of directive 2012/19/EC
of the member state or country where the product will be disposed of.
To Next Page
Loading...
