EasyManua.ls Logo

FläktGroup CET.ACEC - Safety and User Information; Availability of the Operation Manual; Scope of Application of the Operation Manual; Symbols Used

FläktGroup CET.ACEC
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety and User Information CET.ACEC compact controller
4 FläktGroup DC-2017-0104-GB 2018-05/R1 • Subject to change
1 Safety and User Information
FläktGroup CET.ACEC compact controllers are constructed using state-of-the-art
technology and according to recognized safety regulations.
Use the FläktGroup CET.ACEC as intended by the manufacturer and only when it is in
perfect working order. Observe the operation manual and be aware of the dangers and
safety precautions, otherwise there may be risk of death or injury to the user or third
persons. Adverse affects to the CET.ACEC compact controller itself, connected units
or other equipment may also occur!
Have all faults repaired by an authorized specialist without delay!
All information in this chapter is important and relevant for your safety. However, not
all of the information contained in the present manual is labeled with special danger
pictograms.
1.1 Availability of the operation manual
This operation manual contains important instructions regarding safe and correct oper-
ation of the FläktGroup CET.ACEC compact controller.
The current operation manual is intended to be used by operators, building services
engineers, technical personnel or instructed staff as well as electrical specialists.
This operation manual must be available at the location of the FläktGroup CET.ACEC
compact controller at all times Anyone who works with or at the FläktGroup CET.ACEC
compact controller must read and observe this operation manual.
1.2 Scope of application of the operation manual
This operation manual provides information about the following:
Assembly/disassembly
installation
Commissioning and testing
–Operation
Troubleshooting
Maintenance and Cleaning
1.3 Symbols used
The following symbols are used to highlight particular text sections in this operation
manual:
This symbol is used for normal lists.
This symbol indicates instructions to follow.
9 This symbol indicates the result of an action.
notice!
Additional details on using the unit are specified here.