FläktGroup CET.ACEC - Identification of Safety Information; Used Safety Symbols

CET.ACEC compact controller Safety and User Information
FläktGroup DC-2017-0104-GB 2018-05/R1 • Subject to change 5
1.4 Identification of safety information
The following designations/symbols are used in this manual to specify safety-relevant
information:
The following designations/symbols are used in this manual to specify safety-relevant
information:
1.4.1 DANGER - Death/serious irreversible injury
Indicates an extremely hazardous situation which will result in death or serious irre-
versible injury, if the safety instruction is not followed.
Example:
1.4.2 ATTENTION – Environmental or material damage
Indicates actions that can result in damage to equipment or property.
Examples:
1.5 Used safety symbols
Electrocution through hazardous voltage will lead to death or serious injury!
• Disconnect the unit from the power supply and ensure the power cannot be
switched back on.
• Ensure the unit is voltage-free and isolated, earth and short circuit the unit, cover
or shield off neighboring live components.
ATTENTION
ATTENTION
Environmental damage!
Heavily contaminated filters can have a negative impact on production processes.
Depending on the filtered-out materials, contaminated filters are therefore classi-
fied as hazardous waste and must be properly disposed of according to the pre-
vailing guidelines and laws.
ATTENTION
Damage to the unit!
This symbol precedes a warning on static-discharge damage to the unit.
Electrical hazard
PERSONAL injury
Environmental damage
Damage to the unit