flamco ENA 7 - Page 6

We reserve the right to change designs and technical specifications of our products. Manual ENA 7-30
1110
ENG
4. Transport and storage
4.1. Transport
The shipping papers list all the items, such as equipment and documentation. Ensure that the
delivery is complete and not damaged. The automats are packed horizontally on disposable pallets
and are fully assembled.
Identify the items that are missing or not correctly delivered. Read the general terms
and conditions in the shipping papers.
• Transport the pallets horizontally.
• Li the automat just slightly.
Identify the items that are missing
or not correctly delivered. Read the
general terms and conditions in
the shipping papers.
4.2. Storage
Make sure that the storage space meets the
ambient conditions. Refer to section 6.2.
• Take care for an even floor.
Do not stack up.
5. Installation
5.1. Prepare for installation
Make sure that the surface can support the maximum weight of the automat, including
the water.
Refer to chapter 9: Technical specifications
• The automat may not be aected by external forces.
• No dirt may get into the automat and its accessories.
• Install shut-o devices to the drinking water net on-site.
• Plan enough free space around the automat for maintenance work.
• Note the eective regulations regarding the use and the installation location and, if necessary,
inform the responsible testing and certification bodies prior to the launch of the system
5.2. Ambient conditions
> 0,5 m
> 0,5 m
> 0,5 m
< 80%
> 0 °C.....40 °C (ENA 7)
45 °C (ENA 10-30)
Make sure
• that the automat is level;
•that the automat is installed in a closed, dry and frost-
free room;
• to maintain the minimum distances as indicated;
• that the atmosphere does not contain electrically
conducting gases or high concentrations of dust and
vapors. Risk of explosion when there are combustible
gases;
• that the vicinity is clean and well lit.
- Relative humidity: not condensating.
- Free of vibrations.
- Free from heat- and solar radiation.
• that the automat is free from additional loads