To Next PageTo Next PageWhat to do if pump is air-locked and P1 and/or P2 FLOOD LIMIT is displayed on flamco Midi 225D Portable Generator?
If the relevant pump on your Flamco Portable Generator is air-locked and not pumping water, and P1 and/or P2 FLOOD LIMIT is displayed, try bleeding the pump.
How to increase system pressure on flamco Midi 225D Portable Generator?
If the system pressure of your Flamco Portable Generator has fallen, increase the system pressure using a filling loop, or enable the SYSTEM FILL option.
What to do if PUMP TYPE option is set incorrectly on flamco Midi 225D Portable Generator?
If the PUMP TYPE option is set incorrectly on your Flamco Portable Generator, review the PUMP TYPE setting.
What to do if P2 FAIL is displayed on single pump model of flamco Midi 225D Portable Generator?
If P2 FAIL is displayed on your Flamco Portable Generator, but it's a single pump model, the PUMPS NUMBER option is likely incorrectly set to 2. Set PUMPS NUMBER to 1.
General| Brand | flamco |
|---|---|
| Model | Midi 225D |
| Category | Portable Generator |
| Language | English |
Guidance on making correct pipe connections, including important warnings and requirements.
Details the requirements and safety precautions for connecting the unit to the electrical power supply.
Lists essential conditions to check before starting the commissioning process for safety and proper function.
Details how to access and modify controller settings using access codes and button operations.
Details all menu items, their functions, and default values for controller configuration.
Guides on the hydraulic setup and initial operational steps for the unit.
Procedure for bleeding air from the pumps, ensuring efficient operation and preventing damage.
Step-by-step guide for the initial start-up of the unit after hydraulic commissioning.
Lists and explains all fault codes displayed on the digital controller and their reset methods.
Solutions for 'LOW PRESSURE' and 'HIGH PRESSURE' faults and related problems.
Addresses issues with pump flood limits, pump failures, and system undersizing.
Troubleshooting for incorrect pump type settings, pump failures, and isolation issues.
Troubleshooting controller response, parameter corruption, and power-up failures.
