flamco SPC Extension Module - Appropriate Use

TemplateA4_v20120211
4
The present document is a supplement to the Installation and Operating instructions:
Flamcomat, Doc.no.: MC00448/06-2013/eng; Flexcon M-K, Doc. no.: MC00449/06-2013/eng and must be used with these basic documents only.
The general safety instructions contained therein apply in particular, as does the information on equipment, use and function.
Forinstallationinstructionsandfurtherdocumentationinvariouslanguages,visitwww.amcogroup.com/manuals.
FurtherproductinformationcanbeobtainedfromtherespectiveFlamcobranchofce(seepage2).
1. Appropriate use.
Electronic function assembly, expansion for an SPCx-lw / hw control unit for the activation of the 0-10V analogue signal for
theavailablevesselcapacityandactualpressureinputsignalstotheexternalpressureunitwithpump(Flamcomat)orcompressor(M-K).
The declaration of conformity in the basic document is applicable. The usual use is to show and analyse this data in remote control centres for
processlogging,processevaluationanddeninganerror-managementsystem.Signalprocessingunitsmayinclude:programmable,two-channel
display/evaluationunitwithlimitdenition,tendencyevaluation,relayswitchpoints,digitaloranaloguedisplay;datalogger...