- 8 -
Torch nozzel 1 and contact tip 2 are consumables. Please change when needed.
2.3 Gas shielded welding Installation.
MIG welding
The gas cylinder containing the carbon dioxide gas, mixture gas or argon gas decompression
flow meter is closely connected with the intake inlet of the machine.
Connect the machine rear gas fast plug and gas regulator with the gas hose in accessories.
LIFT TIG welding
The gas cylinder containing the argon gas decompression flow meter is closely connected
with the gas tube on torch.
2.4 TIG Torch explosive chart
(Not included in standard accessories)
To Next Page
Loading...