Need help?Do you have a question about the Flashforge Finder 3 and is the answer not in the manual?
Details the printer's main components and ports with labels and diagrams.
Lists all items included in the 3D printer package with images.
Details the process of installing the material rack and loading the filament.
Explains the glass and flexible removable platforms and their installation.
Instructions on how to plug in and turn on the printer, with a voltage warning.
Step-by-step guide on how to level the build plate using the touchscreen.
Describes the process of loading filament via the touchscreen interface.
Provides two methods for installing the slicing software (USB or download).
Guides users through the process of selecting and starting a print job from a USB drive.
Instructions for removing filament from the printer.
Steps to connect the printer to a Wi-Fi network via the touchscreen.
Details how to connect the printer to the computer using Wi-Fi.
Explains two methods for updating the printer's firmware.
Provides important tips and considerations for successful printing.
General| Filament Diameter | 1.75 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Print Speed | 10-100 mm/s |
| Connectivity | USB, Wi-Fi |
| Display | 3.5-inch touchscreen |
| Supported Materials | PLA |
| Power Requirements | 100-240 V, 50/60 Hz |
| Layer Resolution | 0.1 - 0.4 mm (100 - 400 microns) |
To Next Page