Need help?Do you have a question about the Flashforge Creator 3 and is the answer not in the manual?
General| Build Volume | 300 x 250 x 200 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Print Speed | 10-150 mm/s |
| Filament Diameter | 1.75 mm |
| Extruder Type | Independent Dual Extruder (IDEX) |
| Heated Bed | Yes |
| Software | FlashPrint |
| Nozzle Temperature | Up to 300°C |
| Layer Resolution | 0.05 - 0.4 mm |
| Connectivity | USB, Ethernet, Wi-Fi |
| Supported Materials | PLA, ABS, PETG, Nylon, Carbon Fiber |
| Touchscreen | Yes |
| Bed Temperature | Up to 120°C |
| Chamber | Closed |
| File Format | STL, OBJ, 3MF, FPP |
| Machine Dimensions | 627 x 485 x 615 mm |
| Machine Weight | 40 kg |
To Next Page
