Need help?Do you have a question about the Flashforge Creator Pro and is the answer not in the manual?
General| Nozzle width | 0.4 mm |
|---|---|
| Print technology | Fused Filament Fabrication (FFF) |
| Printing material | ABS, Polylactic acid (PLA) |
| Layer thickness (max) | 0.3 mm |
| Layer thickness (min) | 0.1 mm |
| Number of print heads | 2 |
| Maximum build size (WxDxH) | 148 x 227 x 150 mm |
| USB port | Yes |
| Compatible memory cards | SD |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 350 W |
| Package depth | 465 mm |
| Package width | 600 mm |
| Package height | 575 mm |
| Package weight | 21500 g |
| Engraver module | - |
| 3D scanner | No |
| Product color | Black |
| Display technology | LCD |
| Printing compartment volume | 5 L |
Weight and Dimensions| Depth | 332 mm |
|---|---|
| Width | 476 mm |
| Height | 383 mm |
| Weight | 17000 g |
To Next Page
