Flashforge Creator Pro - Safety Notice; Work Environment Safety; Electrical Safety; Personal Safety

5
Safety Notice
! Notices: Read all the instructions in the manual and familiarize yourself with the Flashforge
Creator Pro User Guide before set-up and use. Failure to comply with the warning and instructions
may result in individual injury, fire, equipment damage or property damage.
PLEASE STRICTLY FOLLOW ALL THE SAFETY WARNINGS AND NOTICE BELOW ALL
THE TIME.
· Work Environment Safety
① Keep your work place tidy.
② Do not operate Creator Pro in the presence of flammable liquids, gases or dust.
③ Store Creator Pro out of reach of children and untrained people.
· Electrical Safety
① Always use the Creator Pro with a properly grounded outlet. Do not modify Creator Pro plug.
② Do not use Creator Pro in damp or wet locations. Do not expose Creator Pro to burning sun.
③ Do not abuse the cord.
④ Avoid using the device during an electric storm.
⑤ In case of uncertain accident, please unplug the device if you do not use it for long.
·Personal Safety
① Do not touch the nozzle and build plate during printing.
② Do not touch the nozzle
③ Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away
from moving parts.
④ Do not operate the device while you are tired or under the influence of drugs, alcohol or
medication.