Need help?Do you have a question about the Flashforge Creator3 and is the answer not in the manual?
Detailed guide on threading filament through the extruder for printing.
Explains the process and importance of leveling the build plate for optimal prints.
Configuration options and settings for initiating a print job via FlashPrint.
Step-by-step guide on converting 3D models into printable Gcode files.
Details various methods for transferring Gcode files and starting prints.
Information on obtaining technical support, troubleshooting, and contact details.
General| Build Volume | 300 x 250 x 200 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Extruder Count | 2 |
| Filament Diameter | 1.75 mm |
| Heated Bed | Yes |
| Bed Temperature | up to 100 °C |
| Filament Compatibility | PLA, ABS, PETG, TPU |
| Connectivity | USB, Ethernet, Wi-Fi |
| Operating System | Windows, macOS, Linux |
| Nozzle Temperature | up to 300 °C |
| Display | Touchscreen |
| Power Requirements | 100-240V AC, 50/60Hz |
To Next Page