Flashforge Adventurer3 User Manual

本手册仅适用于闪铸科技 Adventurer3 3D打印机
This guide is only applicable to FLASHFORGE Adventurer3 3D printer
1. Hot! Avoid touching the heating nozzle and heating build plate in operation.
Please refer to FlashForge official website www.flashforge.com to download
the newest User's Guide, Software and Instruction Videos.
(Support-Support Center-Select a Product)
2. Moving parts in printer may cause injury. Do not wear gloves or other
sources of entanglement in operation.
Download
1. 高温危险！打印机喷嘴和打印平台在工作时会被加热，请避免接触!
2. 可动部件可能造成卷入挤压和切割伤害。操作机器时请不要佩戴手套或缠绕物。
前往闪铸科技官方网站 www.sz3dp.com ，可以在[ 技术支持 ] 页面下载用户使
用手册、切片软件等资料，或查看相关操作视频。
资料下载
SZ16-ZN/EN-A06
快速启动指南
ADVENTURER 3 / 冒险家 3
Quick Start Guide
中文P10

Flashforge Adventurer3 Specifications

General

Build Volume	150 x 150 x 150 mm
Layer Resolution	0.1 - 0.4 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Print Speed	10-100 mm/s
Display	2.8-inch touchscreen
Software	FlashPrint
Nozzle Temperature	Up to 240°C
Supported Materials	PLA, ABS
Connectivity	Wi-Fi, USB
Printer Dimensions	388 x 340 x 405 mm
Weight	9 kg
Technology	FDM (Fused Deposition Modeling)
Power Requirements	100-240V, 50/60Hz