Need help?Do you have a question about the Flashforge Adventurer 4 Pro and is the answer not in the manual?
General| Build Volume | 220 x 200 x 250 mm |
|---|---|
| Layer Resolution | 0.1-0.4 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Max Print Speed | 150 mm/s |
| Max Bed Temperature | 110°C |
| Connectivity | Wi-Fi, USB, Ethernet |
| Display | 4.3-inch touchscreen |
| Chamber | Enclosed |
| Max Nozzle Temperature | 265°C |
| Supported Materials | PLA, ABS, PETG |
| Printer Dimensions | 500 x 550 x 570 mm |
| Power Requirements | AC 100-240V |
To Next Page