Need help?Do you have a question about the Flashforge Creator 4 and is the answer not in the manual?
Details the components and layout of the Creator 4 3D printer.
Guide to safely unboxing and setting up the 3D printer.
Lists all items included in the 3D printer package.
Instructions for loading filament onto the 3D printer.
Steps for calibrating the printer's axes and sensors.
Guide to connecting the printer to wired and wireless networks.
How to transfer files to the printer using Wi-Fi.
Instructions for printing files from a USB flash drive.
Steps to print models using the FlashCloud service.
Guide to safely removing printed models from the build plate.
How to use the printer in single-extruder normal printing mode.
Printing with two extruders for dual-color or dual-filament models.
Printing two identical or mirrored models simultaneously.
Details on extruder types and compatible filament combinations.
Guidance on adjusting printing parameters for different filaments.
Steps for removing PVA support material after printing.
How to connect and use the printer's camera.
Overview of the main printing status and control screen.
Interface for loading, unloading, and cleaning filaments.
Screen for setting preheating temperatures for components.
Access to calibration, network, manual control, and maintenance.
Options to configure printer settings like extruder type and auto shut down.
Troubleshooting guide and maintenance procedures.
Illustrated breakdown of left and right extruder assemblies.
Methods for clearing blockages from the printer nozzle.
Procedure for calibrating the flatness of the build platform.
General| Nozzle Diameter | 0.4 mm |
|---|---|
| Connectivity | USB, Ethernet, Wi-Fi |
| Number of Extruders | 2 |
| Extruder Type | Direct Drive |
| Build Plate Temperature | up to 120 °C |
| Filament Diameter | 1.75 mm |
| Filament Compatibility | PLA, ABS, PETG, TPU |
| Display | Touchscreen |
| Chamber | Heated |
| Power Requirements | 100-240V, 50/60Hz |
| Layer Resolution | 0.05-0.4 mm (50-400 microns) |
To Next Page