To Next PageTo Next Page
Need help?Do you have a question about the Flashforge Creator Pro 2 and is the answer not in the manual?
Safety precautions for hot parts and moving parts during printer operation.
Provides website links for downloading user guides, software, and instruction videos.
Details the process of removing the printer and accessories carefully from packaging.
Identifies and labels various parts of the Creator Pro 2 3D printer with numerical references.
Lists and illustrates all items included in the printer package, such as cables, tools, and filament.
Guides on how to mount the dual extruder onto the printer's extruder seat using bolts.
Details installing the spool holder and correctly mounting a roll of filament.
Provides guidance on spool orientation, filament guide tube, top cover, and anti-oozing plate.
Explains how to load and unload filament through the printer's interface using the 'Tools' menu.
Guides on adjusting the print bed using leveling nuts for optimal adhesion and print quality.
Describes the process of calibrating the nozzle height difference for dual extruders.
Guides on aligning the left and right extruders in the X-axis direction to prevent misalignment.
Guides on aligning the left and right extruders in the Y-axis direction to prevent misalignment.
Instructs how to insert the SD card and select a test file to start the first print.
General| Layer Resolution | 100-400 microns |
|---|---|
| Extruder Quantity | 2 |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Print Speed | 10-100 mm/s |
| Heated Bed Temperature | Up to 120°C |
| Technology | FDM (Fused Deposition Modeling) |
| Supported Materials | PLA, ABS, PETG |
| Nozzle Temperature | Up to 240°C |
| Display | 4.3-inch Touchscreen |
