Need help?Do you have a question about the Flashforge Guider 2 and is the answer not in the manual?
Instructions for changing the display language on the printer's interface.
Learn how to adjust the build plate using the leveling nuts for optimal printing.
Key recommendations and best practices to ensure a successful first print.
General| Build Volume | 280 x 250 x 300 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | USB, Wi-Fi, Ethernet |
| Extruder Type | Single Extruder |
| Heated Bed | Yes |
| Nozzle Temperature | Up to 300°C |
| Supported Materials | PLA, ABS, PETG |
| Touchscreen | Yes |
| Power Requirements | 500W |
| Machine Weight | 30 kg |
To Next Page