Flashforge Creator3 - Interface Menus

Creator3 User Guide | www.flashforge.com 400-699-1063
15
2.1.4 Interface Menus
Build
Read the print file from
 The local memory card
 The USB stick
 Back
Select the target print file among the list
 Build: To begin printing.
 Copy: To copy the files to the local
memory card from the USB stick.(The
button is not available while printing from
local memory card )
 Delete: To delete the print file.
 Back
Print interface
 Abort: To abort the print job.
 Pause/Resume: To suspend or resume the
print job.
Left/Right Extruder temperature:
Can be changed during printing.
Platform temperature:
Can be changed during printing.