Flashforge Creator3 - Chapter 7: Basic Printing; Generating Gcode for Printing

Creator3 User Guide | www.flashforge.com 400-699-1063
70
Chapter 7: Basic Printing
This chapter will provide a step-by-step guide on turning a 3D model into a physical
reality. Before proceeding, it is recommended that you’d better go over prior chapters
on loading/unloading filament, leveling the build platform, and the functions and
capabilities of FlashPrint.
7.1 Generate a Gcode
(7-1) Double-click the icon of FlashPrint to start the software.
7-1
(7-2) Click [Print]--[Machine Type] to select FlashForge Creator3
7-2
(7-3)Click the [Load] icon to load a .stl model file and the object will display on the
build area.
7-3
（7-4）Click [Edit]--[Surface to Platform] to make your model perfectly positioned
34