Flashforge Creator3 - Slice and Export the 3 D Model; Build the 3 D Model; Basic 3 D Printing Process

Creator3 User Guide | www.flashforge.com 400-699-1063
10
·From the Cloud The most popular way of obtaining a 3D model is to download it
from websites that allow users to upload 3D models that they designed.
Flashforge Cloud: cloud.sz3dp.com
E.g. : www. thingiverse.com
1.1.2 Slice and Export the 3D Model:
Slice software is the software that prepares 3D models for printing and turns them into
instructions for the 3D printers. FlashPrint is the slicing software used for the
FlashForge Creator3.
Using FlashPrint, you can turn .stl files into .g or .gx files for printing. Then the files
can be transferred to your Creator3 via USB stick, Wi-Fi or Ethernet cable.
1.1.3 Build the 3D Model:
Once the output file has been transferred to your Creator3, it will start to turn the 3D
model into a physical object by laying down layers of filament.
1.1.4 Basic 3D Printing Process：
First
Print
Daily
Print
Install printer
Printer Unboxing
Accessories check
Filament Loading
Install software
Install software
Start software
Distribute
print jobs
Print model
Acquire
model
Load in
model
Adjust
model
Set printing
parameters
After print
Processing
Remove
supports
Take down
model