① Do not leave the device unattended for long.
② Do not make any modifications to the device.
③ To lower the build plate before loading/unloading filament. (The distance between the nozzle
and build plate should be kept for at least 50mm)
④ Operate the device in a well-ventilated environment.
⑤ Do not touch the nozzle and build plate during operation.
⑥ Never use the device for illegal activities.
⑦ Never use the device to make any food storage vessels.
⑧ Never use the device to make any electrical appliance.
⑨ Never put the model into your mouth.
⑩ Do not remove the models with force.
· Environment Requirements
Do not abuse the filament. Please make sure you use the Flashforge filament or the filament from
the brands accepted by Flashforge.
Legal Notice
All the information in this document is subject to any amendment or change without the official
authorization from Flashforge.
FLASHFORGE CORPORATION MAKES NO WARRANTY OF ANY KIND WITH REGARD
TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRATIES
To Next Page
Loading...
