Warning! Be careful of your body position when using manual tool to remove the model from build plate. Sudden
tool slippage and improper body position may cause injury.
Caution: Do not scratch build plate when removing the model.Scratches in build plate will cause modeling errors.
· Model cooling
· Use scraper
· Use water
When PVA used as support material, we suggest doing follow-up processing by immersing PVA into water to remove
support.
1. Immerse model into water
2. Wash with water
3. Dry the model
4. Wastewater treatment
-
Water is available for repeated use,but immersing multiple models may increase dissolution time, we suggest using
new water in order to reach best effect.
32
To Next Page
Loading...
