8
Click on the filament icon (second from left) and [Load] on the screen, select the
corresponding filament for the extruder, start filament feeding, and operate the printer
by following the on-screen instructions.
Calibration
The 3D printer includes the following calibration operations: Z-axis calibration, sensor
calibration, assist calibration (complete mode, simplified mode).
The 3D printer has been levelled and calibrated before leaving the factory, so it is
generally unnecessary to perform calibration again. However, the levelling plane may be
damaged due to the vibration generated during transportation. It is recommended to
perform a Z-axis calibration and a sensor calibration before first use.
To Next Page
Loading...
