FLAVIA Creation 150 TM - Brewing a Cappuccino;Latte; Brewing Process

BREWING A CAPPUCCINO/LATTE
9
4.
Press the
Cappuccino/
Latte drink
selection
button.
1.
OpenthePack
Door by turning
theGripRing
anti-clockwise
and insert a
Cappuccino/Latte
Swirlpack.
2.
Close Pack
Door by
turning he
GripRing
clockwise.
3.
Place a cup
centrally on the
CupStandand
push back until
it touches the
backstop.
6.
OpenthePackDoorbyturningtheGripRinganti-clockwiseand
removetheCappuccino/Latteswirlpack.Insertacoeefreshpack
andclosethePackDoorbyturningtheGripRingclockwise.Please
note that some resistance may be felt as the Pack Door is closed. This
isnormal;thisstepis“piercing”thepackseal.
8.
Whenbrewingiscomplete,TurntheGripRing
anti-clockwise to open the Pack Door and remove
the used freshpack for disposal.
HOT WATERFACILITY
Withnofreshpackinplace,pressandholdthe‘HOTWATER’button.Hotwaterwillbegintoow
whilstthebuttonispressed.Releasethebuttontostopthewaterow.Thehotwaterdispensewill
automaticallystopafteramaximumvendvolumehasbeenreachedifthebuttonisnotreleased.
CappuccinoandLattedrinksaremadeusingtwopacks,rstlyaCappuccino/LatteSwirlpack
followedbythecoeeofyourchoice.It is important that the packs are placed in the correct
order. Please see the packs for further information.
5.
Afterbrewingthe
Cappuccino/Latte swirl
pack the indicator lights
will flash in an arrow
pattern.
7.
Press the Cappuccino/Latte swirl drink
selection button and your drink will now be
freshlylteredandbrewedintoyourcup.
Note:
Alwaysuse
GripRingto
operate Pack
Door.
CAUTION:
Take care when
removing pack
immediately after
brewing as it will
beHOT.