Fleck 5600 SXT Programming

www.h2ofilters.ca


FLECK 5600 SXT WATER
SOFTENER PROGRAMMING
TO ENTER INTO MASTER PROGRAMMING: Press the arrow up button and set the time to 12:01
P.M., then press the extra cycle button once. Now press the up and down buttons together for
approximately 8 seconds until the display changes to the programming mode.
The display should now be:
Press the Extra Cycle button to advance to the next step.
Next display should be:
Press the Extra Cycle button to advance to the next step.
Next display should be:
Press the Extra Cycle button to advance to the next step.
Next display should be:
Press the Extra Cycle button to advance to the next step.

Fleck 5600 SXT Specifications

General

Brand	Fleck
Model	5600 SXT
Category	Water Dispenser
Language	English