Need help?Do you have a question about the Fleck 9100SXT Meter and is the answer not in the manual?
General| Type | Water Softener |
|---|---|
| Connection Size | 1" NPT |
| Display | LCD |
| Valve Material | Noryl |
| Programming | Electronic |
Introduction to the water softener installation and start-up instructions.
Essential conditions and requirements to meet before installing the water softener system.
Instructions on selecting a location and properly filling the softener tank with media.
Step-by-step guide to lubricating and attaching the Fleck 9100SXT meter control valve to the tank.
Guidance on connecting the water softener to the home's plumbing system, noting IN/OUT ports and shut-off valves.
Detailed steps for connecting the brine tubing and float assembly to the brine tank.
Instructions for connecting the drain line from the softener valve to a suitable drain or standpipe.
Procedure for setting water hardness, time, and other parameters on the Fleck 9100SXT control valve.
Steps to safely introduce water to the softener, purge air, and add salt to the brine tank.
To Next Page
