D
Donald AndersonJul 26, 2025
Why is there excessive water in the brine tank of my Fleck Water Dispenser?
- CCorey DuranJul 26, 2025
If your Fleck Water Dispenser is experiencing excessive water in the brine tank, possible causes include: * A plugged drain line flow control; check the flow control. * A plugged injector system; clean the injector and screen. * The timer not cycling; replace the timer. * Foreign material in the brine valve; replace the brine valve seat and clean the valve. * Foreign material in the brine line flow control; clean the brine line flow control. * Power loss during brine fill; check the power source.