Rotational laser
13
Overview
1 LED operating mode
Lit = rotating laser beam
Flashing = scan mode
2 On/Off button
1x switches on/off the ALR
2x switches on the hairline function
3 LED standby
Lit = power tool ready to use
Flashing = change batteries
4 Arrow buttons ts
a) Changes the speed of rotation
b) Changes the beam position in scan
mode
5 Mode button
Selects operating modes in scan mode
6 Rotating head
Discharge window for
– rotating laser beam
– perpendicular beam (pencil beam at
right angles to the rotating laser beam)
7 Laser beam window
Discharge window for vertical beam
(hairline function) at right angles to the
rotation level
8 Horizontal spirit level
levels the machine for horizontal
application in the Y direction
9 Foot screw
aligns the machine in the Y direction
10 Adjusting wheel
inclines the rotation level (4 %)
11 Foot screw
aligns the machine in the X direction
12 Horizontal spirit level
levels the machine for horizontal
application in the X direction
13 Vertical spirit level
levels the machine for vertical
application
14 Battery compartment
15 Socket
For connection of a standard power
supply unit (6V d.c.)
16 Wall and tripod bracket
17 Tripod thread 5/8"
for horizontal and vertical attachment
of the machine to a tripod (accessory)
Laser_ALR411.book Seite 13 Donnerstag, 24. Februar 2005 9:42 09
To Next Page
Loading...