EasyManua.ls Logo

Flex QQ Extra 300 - Flight Control Sensing Direction Test

Flex QQ Extra 300
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Aircraft
Movement
Proper Control
Surface Deection
AILERON
RUDDER ELEVATOR
FLIGHT CONTROL SENSING DIRECTION TEST
Perform a test of the gyro system to verify the corrections made for a given movement are correct. If any of the tests do not result in the
correct reaction from the airplane’s gyro system, do not y the airplane, and refer to the Aura 8 manual for more information.
The ight control system activates with RF broadcast. Perform these tests in Mode 3 (higher gain) for better visibility and then in Mode 2,
and any other modes that have gyro gains assigned. (By default, Mode 1 has no gain assigned.). Control surface deections are exagerated in
the drawings below for clarity.