0708
Handle up adjusts seat height
A is locked position
B is unlocked position
Recommended to
use B position to
get dynamic
support
Safety Instructions
WARNING: Failing to follow the instructions below may result in serious injury!
1. This product is for sitting only, it is strictly forbidden to stand on the product or to use it as a ladder, etc;
2. Use this product only when all screws and parts are locked. Check the locking of all screws and parts at
least every 3 months;
3. If any parts are missing, damaged, or worn, stop using the product and repair it with factory-supplied
parts;
4. It is strictly forbidden to sit on the armrests of the product;
5. This product is designed as a one-person seat and is limited to one person per use;
6. Children under the age of 10 should use this product under adult supervision.
This handle controls the
reclining angle of the chair backrest
The lumbar support can be adjusted up
and down.
Note: The switch is used for vertical
positioning rather than full locking.
Positioning is achieved through slots that
provide light fixation and resistance at the
optimal position.
This handle controls
the reclining tension
This handle controls
the seat tilt forward
To Previous Page
Loading...
