Flexispot E2W User Manual

Item No. E2W
Installation Guide
01
Attention
·Power supply: AC120V ± 10%, frequency 60HZ;
·Working environment: 32º - 1 04º F ;
·Before cleaning, you have to unplug the power supply cable. Clean with a slightly damp cloth to
wipe away the surface dust. Keep all electrical components away from liquids. Do not damage the
connection line and keep the plug in a safe position.
·Inside the control box, there are electronic components, metal parts, plastic parts, wires and so on.
They should be disposed in accordance with the local laws and regulations. They cannot be disposed
as household waste.
·Before using the product, please make sure the product has been installed correctly.
·Before starting use of the product, please read the instructions to fully understand all the product's
functions and settings.
·Keep children away from electric height-adjustable desks, control units and handsets.
Manufacturer is not responsible of any damages that result from children's unpredictable behaviour.
·Slight noise caused by the multi wedge belt or brake system will not impact the use of this product.
·Do not use corrosive or abrasive materials to clean this product and please dispose of cleaning
solutions in an environmentally friendly manner.
·Understand the risks associated with using this product. Children or those with cognitive impairment
should not use this product without supervision.
·If the power supply cord is damaged or broken, it must be replaced by the manufacturer or a relevant
specialist to avoid any injuries.
·Please operate in a clean and safe environment. For example, do not left around your tools. And
always be careful to deal with packaging materials, in order to avoid any kinds of possible danger.
Potential chocking risk exists when children play with plastic bags!
·If necessary, retain the original package for future transportation.
Recycling and Disposal
This product cannot be disposed of as household waste. To prevent damage to the
environment, this product should be recycled. Please use the relevant recycling
systems available to you or contract the distributor or manufacturer for recycling
assistance.
08
Website: www.flexispot.com
Tel: 1-855-421-2808

Flexispot E2W Specifications

General

Model	E2W
Category	Indoor Furnishing
Type	Standing Desk Frame
Frame Material	Steel
Assembly Required	Yes
Motor	Dual Motor
Adjustable Foot Pads	Yes
Noise Level	<50 dB
Warranty	5 years
Color Options	White
Frame Color	White

Summary

Attention and Safety Precautions

Power, Environment, and Cleaning Safety

Guidelines for power supply, working environment, and cleaning to prevent damage and hazards.

Safe Operation and User Responsibility

Instructions for correct installation, child safety, and maintaining a safe operating environment.

Recycling and Disposal

Product Disposal Guidelines

Instructions for environmentally responsible disposal of the product, emphasizing recycling.

Product Specifications and Components

Technical Specifications Summary

Key technical details including weight capacity, speed, voltage, and dimensions.

Accessory Package Overview

Visual identification of included parts and hardware for assembly.

Assembly Instructions

Step 1: Attach Connecting Arms to Legs

Connecting the arms to the legs using M6x10mm bolts.

Step 2: Attach Side Brackets to Legs

Attaching side brackets to the legs using M6x10mm bolts.

Step 3: Attach Feet to Legs

Securing the feet to the bottom of the legs with M6x16mm bolts.

Step 4: Connect Cross Bars

Connecting arms with cross bars using M6x30mm bolts and knobs.

Step 5: Attach Work Surface

Securing the work surface to the side brackets using St4.2x20mm screws.

Step 6: Install Control Box and Handset

Mounting the control box and handset to the worksurface.

Step 7: Connect Cables

Connecting handset, power, and motor cables to the control box.

Handset and Troubleshooting Guide

Handset Operation Guide

Explanation of handset buttons for lifting, lowering, saving height, and reminders.

Troubleshooting Common Faults

List of common issues and their solutions, including slow lifting and motor problems.

Troubleshooting No Response

Steps to resolve issues where the desk does not respond to UP/DOWN commands.