Diagram of Adjustment
05 06
Safety Instructions
WARNING: Failing to follow the instructions below may result in serious injury!
1. This product is for sitting only, it is strictly forbidden to stand on the product or to use it as a ladder, etc;
2. Use this product only when all screws and parts are locked. Check the locking of all screws and parts at
least every 3 months;
3. If any parts are missing, damaged, or worn, stop using the product and repair it with factory-supplied parts;
4. It is strictly forbidden to sit on the armrests of the product;
5. This product is designed as a one-person seat and is limited to one person per use;
6. Children under the age of 10 should use this product under adult supervision.
The lumbar support
can be adjusted up
and down.
Note: The switch is
used for vertical
positioning rather
than full locking.
Positioning is
achieved through
slots that provide
light fixation and
resistance at the
optimal position.
Headrest 45° adjustment Headrest up and down adjustment
Armrest height adjustment
Armrest forward and
backward adjustment
Armrest 360° rotation adjustment
Seat cushion forward
and backward adjustment
A
B
Handle up adjusts
seat height
Rotate the handle
to adjust the
reclining tension
Note:
Recommended to
use B position to
get dynamic
support
A is locked position
B is unlocked position
Rotate the handle
to adjust seat tilt
forward
Rotate handle to
lock/unlock
reclining function
Rotate handle to
adjust seat
forward/backward
To Previous Page
Loading...
