32
NORDICPANEL
5. Speed setting
7KHUHDUHȴYHVSHHGPRGHVWRFKRRVHIURP
IRXUbRIbZKLFK\RXFDQFKDQJHXVLQJ1RUGLF3DQHO
7KHFXUUHQWVSHHGLVVKRZQDVDȴOOHGLQV\PERO
AWAY: This is a constant mode and is intended for when the building is not in use for
extended periods. You can also set a delayed start, which can be useful if you have just
ȴQLVKHGVKRZHULQJEHIRUHOHDYLQJWKHKRXVH
If
is displayed together with the symbol, it means that there is a time delay before
the unit switches from the current speed to AWAY.
HOME: This is a constant mode and is intended for when the building is in normal use.
HIGH: This can be both a constant mode and a temporary mode with a set duration.
ΔWbLVLQWHQGHGIRUZKHQ\RXWHPSRUDULO\QHHGPRUHYHQWLODWLRQ
If
is displayed together with the symbol, this means there is a timer set for HIGH
DQGbYHQWLODWLRQZLOOUHWXUQWRWKHSUHYLRXVVSHHGZKHQWKHWLPHUUXQVRXW
FIREPLACE:7KLVLVRQO\DYDLODEOHDVDWHPSRUDU\PRGHZLWKDVHWGXUDWLRQΔWLVbLQWHQGHG
IRUWHPSRUDU\XVHWRJHWKHUZLWKDȴUHSODFHΔWFUHDWHVDQRYHUSUHVVXUHLQWKHEXLOGLQJ
to facilitate smoke going up the chimney, which prevents smoke from entering
WKHbEXLOGLQJ
COOKER HOOD: This mode can only be activated using a wireless or wired accessory
that is mounted on your cooker hood. This is activated when you use your cooker hood.
The icon is only displayed when it is activated.
To change speed you must be on the home screen.
7KHQbSUHVVWKHV\PERORIWKHVSHHG\RXZDQWWRFKDQJH
to, in this case from AWAY to HOME. Note that the set
value for the supply air temperature will also change.
NOTE! If it is not possible to change the speed,
LWbPD\EHbEHFDXVHWKHXQLWKDVEHHQRYHUULGGHQ
E\bWKHbFDOHQGDURUDSK\VLFDOLQSXW