Flexitron Webdyn WebdynModbus - Automatic Connection on Data Capture

contact@webdyn.com | webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
31
Example:
Conguration:
Connection_Hour=7
Connection_Minute=5
Connection_Hour1=12
Connection_Minute1=10
Connection_Hour2=18
Connection_Minute2=15
Connection times:
Day d: 07:05, 12:10, 18:15
Day d+1: 07:05, 12:10, 18:15
6.4.4 Automatic Connection on Data Capture
Automatic connection on data capture consists of instructing the WebdynModbus to connect to the
remote FTP server, to upload the newly captured data, as soon as it is available. This is congured by
setting the variable “Connection_OnDataAcquisition” in the conguration le prexID_var.ini to 1.
In this operating mode, conguration checking and time synchronisation still take place periodically or at
xed times, depending on the conguration, as shown in the foregoing chapters.
Example:
Conguration:
Connection_OnDataAcquisition=1
Connection_Period=0
Connection_Hour=23
Connection_Minute=0
And the data capture period is dened to be 15 minutes:
DAQ_Period=15