FlexRadio Systems FLEX-6500 User Manual

FLEX-6000 Signature Series – FLEX-6000 Hardware Reference Manual
Page 17 of 48
Copyright 2016 FlexRadio Systems. All Rights Reserved.
5.2.4 Additional Items not Included but Required
In addition to the supplied accessories, software and cables supplied with the FLEX-6000
Signature Series SDR, you will need to provide the following:
 An HF-Antenna or dummy load.
 An RF ground (if possible).
 Powered stereo speakers (computer type) or stereo headphones.
 A stabilized 13.8V DC power supply, capable of 25A or greater continuous duty.
 A Personal Computer (PC) running Windows Vista Service Pack 2 or above. Either 32 or
64-bit operating systems are supported (64-bit recommended).
 A 100/1000BaseT Ethernet Access – either an open port on your computer or on your
local area network (LAN) Ethernet switch.
5.3 REPORTING DAMAGE
Please report any missing items or shipping damage to FlexRadio or your Distributor
immediately. It is helpful to take digital pictures of the damage to assist in resolving the
issue with the shipper. See the CONTACT US web page FlexRadio contact information. You
can always open a HelpDesk Ticket at https://helpdesk.flexradio.com

FlexRadio Systems FLEX-6500 Specifications

General

Brand	FlexRadio Systems
Model	FLEX-6500
Category	Radio
Language	English