Page 21 of 73
Copyright 2023 FlexRadio. All Rights Reserved. 4 January 2023 (FW:3.7.28 Utility:3.7.28)
3.4 Configuring for Use with Other Exciters
3.4.1 Configure Using the Utility Program
The following describes the configuration of the Power Genius XL for use with non-Flex exciters using CAT data
inputs.
Start the Power Genius XL Utility program and connect to the amplifier. Double click on the amplifier in the
chooser:
Click the configuration icon, as shown below, outlined in red. Click on Options, then Device Settings in the drop-
down menu:
To Next Page
Loading...