OVERHEAD DOME LIGHT
A three-position slide switch controls the Dome Lights on the
LCM1502TV. Sliding the switch to the ON position will turn the
Dome Lights ON. The OFF position will prevent the Dome
Lights from turning ON at all times and the auto position will
allow the Dome Lights to turn ON and OFF with the vehicle’s
interior lighting. Do not leave the vehicle unattended with the
Dome Lights switch in the ON position, as this could result in
a discharged battery.
REMOTE INFRARED SENSOR / REPEATER
The LCM1502TV incorporates a Infrared Sensor which relays
the signals from the Remote Control to allow the LCM1502TV
to be controlled simply by pointing it’s Remote Control at the
remote sensor. This provides control of auxiliary equipment
such as an Flexvision VCP or DVD Player. The Remote
Infrared Sensor can relay signals from most manufacturers
Remote Control to its respective component connected to the
Video 1 and 2 inputs. In this case you must use the Remote
Control supplied with the other manufacturers component.
Dome Light
Dome Light Switch
Dome Light
OPERATION
Remote Infrared Sensor
24
To Next Page
Loading...