EasyManuals Logo

flexvision LCM1502TV User Manual

Default Icon
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
TROUBLESHOOTING
PROBLEM SOLUTION
Poor TV Reception
Perform auto programming of the tuner
Verify antenna condition.
NOTE: Due to the nature of TV signals, vehicle motion, direction the vehicle is facing,
distance from the transmitter, nearby surroundings and weather may adversely affect TV
reception. These conditions may result in the following: picture roll, “snowy” picture, or
momentary loss of color. Please refer to page 2 for more information on TV reception.
Poor radio reception
(FM modulator installed)
No power to LCD
Power but no video or sound
IR sensor inoperative
Check the condition of the vehicle’s radio antenna.
Verify that the antenna is fully raised
If a wired RF modulator has been installed, verify that it’s switch is turned to the off position
Verify +12VDC on red wire at power harness going to the video pod. Verify ground
connection.
Verify connections at both ends of source component harness.
Verify that the batteries in the remote are fresh
Verify that the remote eye is not obstructed.
Verify that the infrared transmitter is affixed over the sensor eye of the component to be
controlled
29

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the flexvision LCM1502TV and is the answer not in the manual?

flexvision LCM1502TV Specifications

General IconGeneral
Brandflexvision
ModelLCM1502TV
CategoryMonitor
LanguageEnglish