EN-USEN-US English
2. Insert the ThermoVision™ System
Step 1: Unpacking the
Tools & Utilities CD-ROM into the
camera
CD-ROM drive on the computer. The
General
installation should start automatically.
Should the installation not start auto-
The number of parts and accessories
matically, start Windows
®
Explorer
included depends on the camera model
and double-click SETUP.HTM on the
and/or customer configuration.
CD-ROM.
Contents
3. Click one of the following:
• Hard transport case or cardboard box
• Install FLIR IP Config.
• Infrared camera with lens
• Install FLIR IR Monitor.
• ThermoVision™ System Tools & Util-
ities CD-ROM
4. Note: If you are a software developer
• Application CD-ROM
you will also need to install AXXX
• Calibration certificate
Control & Image Interfaces. This in-
• Ethernet™ cable
stallation includes Interface Control
• Mains cable
Documents (ICDs), documentation,
• Power cable, pig-tailed
and C-code examples. We rec-
• Power supply
ommend that you read through the
• Printed Getting Started Guide
documentation.
• Printed Important Information Guide
5. Follow the on-screen instructions.
• User documentation CD-ROM
Note
• Warranty extension card or Regis-
tration card
• You must be an Administrator or a
• USB cable
user with Administrative Rights to in-
stall the programs.
Note
• A complete installation consists of sev-
FLIR Systems reserves the right to
eral subinstallations, some of which
discontinue models, parts or accessories,
are from third-party vendors. Do not
and other items, or to change
abort these subinstallations, as they
specifications at any time without prior
are needed for the complete instal-
notice.
lation.
• A complete installation can take up to
Step 2: Installing the
10 minutes to complete.
programs
General
Last-minute changes and other important
information can be found in the read-me
file on the CD-ROM. We recommend that
you read this file before you install the
programs.
Procedure
1. Close down all applications.
© 2011, FLIR Systems, Inc. All rights reserved worldwide.
18
Publ. no. T559492, rev. 010