This document does not contain any export-controlled information.
Ariel™ Mini-Dome
CM-3202-11-I
Quick Install Guide
1. Check Contents
Make sure all of the items above are included in the camera kit.
2. Prepare to Install the Camera
2.1 Install FLIR Discovery Network Assistant
Download the FLIR Discovery Network Assistant (DNA) tool to a computer on the
same VLAN to which you will connect the camera, and then unzip the file. The DNA
tool does not require a license to use and is a free download from FLIR.com >
Products > Security > Visible Security Cameras > FLIR ARIEL™ CM-3202.
2.2 Perform a Bench Test (Optional)
You can test the camera or configure it for networking before mounting it. Remove
the camera cover (see 3.2 Remove Camera Cover), connect the camera (4.3 Route
Cables and Connect the Camera), and attach the camera cover (4.3 Attach
Camera Cover). Then, you can perform a bench test or discover the camera and
configure it for networking (4.1 Configure for Networking) before continuing with
2.3 Select a Location.
To Next Page
Need help?
General
