FLIR Extech IRC30 User Manual

11.10 Marking all areas above or below a set temperature
level
General
You can mark all areas above or below a set temperature level.
Procedure
Follow this procedure:
Push the left selection button (Menu).1
Use the navigation pad to select Measurement.2
Push the left selection button (Select).3
Use the navigation pad to select one of the following:
■
Detect above
■
Detect below
4
Push the left selection button (Select).5
To change the temperature level above or below which you want to mark
the areas, use the navigation pad.
6
26 Publ. No. T559580 Rev. a486 – ENGLISH (EN) – November 17, 2010
11 – Using the camera

FLIR Extech IRC30 Specifications

General

Brand	FLIR
Model	Extech IRC30
Category	Scanner
Language	English