FLIR Extech IRC30 User Manual

11.17 Resetting the camera
General
If you need to reset the camera, there is a reset button inside the battery compartment.
NOTE
Do not use a metal or other conductive tool to reset the camera.
Procedure
Follow this procedure to reset the camera:
Open the battery compartment cover.1
To locate the reset button, see the figure below.
T630179;a1
2
Use a non-conductive tool to push reset button. The camera will now be
reset.
3
Publ. No. T559580 Rev. a486 – ENGLISH (EN) – November 17, 2010 33
11 – Using the camera

FLIR Extech IRC30 Specifications

General

Brand	FLIR
Model	Extech IRC30
Category	Scanner
Language	English